|
APPLICATIONS: The Hersey® HOT ROD™ is a high performance,
low cost transmitter designed for mobile AMR. It is
compatible with all current Hersey meters utilizing the Translator® Positional Encoder Register and other manufacturers’ encoder registers outputting a similar protocol. The primary
function of the HOT ROD module is to transmit an encoded
serial number, water consumption, leak detection information
and status data via radio frequency. When combined with the
Hersey STREET MACHINE™ Mobile Receiver and EZ Reader™ Software, it provides the basis for high speed, high performance
meter reading.
INSTALLATION: HOT ROD modules are available in two options.
Pit set installations require no drilled holes through the
lid and are mounted beneath the meter box lid for security and
ease of installation on PVC pipe. Surface mounts are easily
accomplished with the integral mounting brackets and two
screws.
PERFORMANCE: The HOT ROD module utilizes the 902MHz to
928MHz ISM band which are FCC license exempt frequencies
which translates to lower initial start up costs. The HOT ROD
module transmits or “bubbles up” every 2 seconds on multple
frequencies without the need of a “wake up call' insuring a
continuous information stream for absolute data collection.
Each transmission lasts only 2.5 milliseconds. That equates
to almost 16 million opportunities per year to read each HOT
ROD module and unparalleled performance at low cost.
CONFORMANCE TO STANDARDS: FCC compliance: Part 15
certified. HOT ROD complies with Standard C707 for Encoded
Remote Reading Systems. No FCC License is required for
operation.
CONSTRUCTION: The HOT ROD module consists of a compact
printed circuit board which is encapsulated to provide
complete protection against shock and water intrusion. The
enclosure is made of UV stable, high density thermoplastic and
is completely waterproof. All modules have integral mounting
brackets for both pit and wall installations. One C size lithium
battery provides plenty of power for reading the register and
sending RF data. The battery is sealed within the module and
is not replaceable. There are no customer serviceable parts
inside the HOT ROD.
|
